Seven Editora
##common.pageHeaderLogo.altText##
##common.pageHeaderLogo.altText##


Contacto

  • Seven Publicações Ltda CNPJ: 43.789.355/0001-14 Rua: Travessa Aristides Moleta, 290- São José dos Pinhais/PR CEP: 83045-090
  • Contacto principal
  • Nathan Albano Valente
  • (41) 9 8836-2677
  • editora@sevenevents.com.br
  • Contacto de soporte
  • contato@sevenevents.com.br

Prototype to automate the screwing process in motion on the back covers of televisions using the conveyor tracking technique

Feitoza WO;
Glória DS;
Nascimento CWA;
Gouvêa NA;
Moura RS;
Périco AM;
Sodré AB;
Lima ÂTP;
Gomes CCA;
Leão JM;
Lira RS

Weidson de Oliveira Feitoza

Darío da Silva Glória

Carlos Wagner Alves Nascimento

Nelson Alexandre Gouvêa

Ricardo da Silva Moura

Alexandre de Magalhães Périco

Anderson Bentes Sodré

Ângela Timótia Pereira Lima

Caio César de Araújo Gomes

Juliana Marques Leão

Renato Souza de Lira


Resumen

This article aims to address the automation of the screwing process of the back cover of televisions. Currently, this task is performed manually, which results in slow production, repetitive effort, and intense concentration on the part of operators. The proposed solution involves the development of a prototype that uses the conveyor tracking technique  to automate on-the-go bolting. During the development of the project, several challenges were faced, such as: precise torque control to ensure that the bolts are tightened with the correct force, implementation of a vision system to use cameras to identify screwing points, synchronization with different models on the conveyor belt to adapt the system to handle different types of televisions,  automatic feeding of the screws to ensure that the screws are supplied continuously, compliance with the current line times (Takt Time) to maintain the proper production rhythm and confirmation of screwing at each point of the product to verify that all screws have been correctly tightened. The methodology used in the development of the bolting module included the following steps: specification of requirements and planning that aims to identify the functionalities of the prototype and planning of activities, the mechanical design that allowed the creation of 3D and 2D drawings of the bolting module, the automation project responsible for the preparation of a bill of materials or commercial items and the software project stage responsible for programming the automation of the module, including control logic and communication with other systems. The successful implementation of this project will result in a number of benefits for the production line, including increased productivity, reduced operator fatigue, and improved product quality. In summary, scientific research not only enhances industrial processes but also enriches society and strengthens the academic knowledge base.

 

DOI:https://doi.org/10.56238/sevened2024.010-065


Creative Commons License

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.

Derechos de autor 2024 Weidson de Oliveira Feitoza, Darío da Silva Glória, Carlos Wagner Alves Nascimento, Nelson Alexandre Gouvêa, Ricardo da Silva Moura, Alexandre de Magalhães Périco, Anderson Bentes Sodré, Ângela Timótia Pereira Lima, Caio César de Araújo Gomes, Juliana Marques Leão, Renato Souza de Lira

##plugins.themes.gdThemes.article.Authors##

  • Weidson de Oliveira Feitoza
  • Darío da Silva Glória
  • Carlos Wagner Alves Nascimento
  • Nelson Alexandre Gouvêa
  • Ricardo da Silva Moura
  • Alexandre de Magalhães Périco
  • Anderson Bentes Sodré
  • Ângela Timótia Pereira Lima
  • Caio César de Araújo Gomes
  • Juliana Marques Leão
  • Renato Souza de Lira